Table of Contents
Advertisement
Depending on your specific audio/video connection method, the audio
format options of the 751BD may need to be adjusted to match your
configuration. Please refer to the video and audio connection methods
described previously in this guide and the following audio setup
guidelines.
Audio connection directly to TV
If the player is connected directly to the TV through HDMI, through DVI
and analogue L/R audio cables, or through component video and
analogue L/R audio cables, it is recommended that you use the following
audio format options:
Secondary Audio:
On
HDMI Audio:
LPCM
SACD Output:
PCM
HDCD Output:
On
Coaxial Optical Output:
(any – not in use)
LPCM Rate Limit:
(any – not in use)
Multi-channel digital audio to Receiver through HDMI
If your receiver supports HDMI v1.3 with decoding capability for high
resolution lossless audio formats such as Dolby TrueHD and DTS-HD
Master Audio, please set these audio format options:
Secondary Audio:
Off (or On if you need secondary audio)
HDMI Audio:
Bitstream
SACD Output:
PCM (or DSD if the receiver supports
DSD over HDMI)
HDCD Decoding:
On (or Off if the receiver can decode
HDCD)
Coaxial Optical Output:
(any – not in use)
LPCM Rate Limit:
(any – not in use)
If your receiver supports HDMI v1.1/1.2 Multi-Channel PCM audio, but
not high resolution lossless audio formats such as Dolby TrueHD and DTS-
HD Master Audio, please set these audio format options:
Secondary Audio:
Off (or On if you need secondary audio)
HDMI Audio:
LPCM
SACD Output:
PCM (or DSD if the receiver supports
DSD over HDMI)
HDCD Decoding:
On (or Off if the receiver can decode
HDCD)
Coaxial Optical Output:
(any – not in use)
LPCM Rate Limit:
(any – not in use)
Multi-channel analogue audio to Receiver
If the player is connected to an A/V receiver through the 7.1ch or 5.1ch
analogue audio jacks using 8 or 6 RCA/Phono cables, you can still play
all the supported audio formats and let the 751BD decode them and then
listen them via your A/V receiver and surround-sound system. The
following audio format setup options are recommended:
Secondary Audio:
Off (or On if you need secondary audio)
HDMI Audio:
Off
SACD Output:
PCM (DSD is not available through the
analog audio output)
HDCD Decoding:
On
Coaxial Optical Output:
(any – not in use)
LPCM Rate Limit:
(any – not in use)
Also set Speaker Configuration in the
Set Down Mix to
7.1Ch
or
5.1Ch
"
"
"
"
Set the speaker size and subwoofer properly according to your actual
audio hardware as detailed on the following pages.
Enable or select the multi-channel analog inputs on your receiver.
Audio Processing
menu:
"
"
.
Multi-channel digital audio to Receiver through Coaxial
or Optical SPDIF
If your receiver only supports Coaxial/Optical, Dolby Digital and DTS
decoding, the following audio format setup options are recommended:
Secondary Audio:
Off (or On if you need secondary audio)
HDMI Audio:
Off
SACD Output:
(any – SACD is not available through
the optical/coaxial output)
HDCD Decoding:
On (or Off if the receiver can decode
HDCD)
Coaxial Optical Output:
Bitstream
LPCM Rate Limit:
48k (or higher if supported by the
receiver)
Stereo analogue audio to Receiver
If you primarily listen to stereo content or your receiver only offers stereo
audio connections, please use the analogue RCA-style cables to connect
the FL (Front Left) and FR (Front Right) of the player to your receiver. The
following audio format options are recommended:
Secondary Audio:
Off (or On if you need secondary audio)
HDMI Audio:
Off
SACD Output:
PCM (DSD is not available through the
analog audio output)
HDCD Decoding:
On
Coaxial Optical Output:
(any – not in use)
LPCM Rate Limit:
(any – not in use)
The
Audio Processing Setup
section of the Setup Menu system allows
"
"
you to configure how the player will process audio signals before sending
them to the output.
Setup Menu
Playback Setup
Speaker Configuration
Video Setup
Crossover Frequency
Audio Format Setup
Dynamic Range Control
Audio Processing
Device Setup
Network Setup
Exit
Configure speaker arrangement for the analog audio output
Menus
Speaker Configuration
Crossover......................................................40Hz –250Hz
Dynamic Range Control ...............................Auto
azur
751BD
80Hz
Auto
Exit
Settings
On
Off
29
Hide quick links:
Advertisement
Table of Contents
