Introduction; Safety Is Important; Region Code - Alba RDVD1002 User Manual

RDVD1002.book Page 2 Tuesday, January 24, 2006 12:25 PM
RDVD1002

Introduction

Thank you for purchasing this DVD Recorder which has been designed
and manufactured to give you many years of trouble-free service.
You may already be familiar with using a similar product but please take
time to read these instructions which have been written to ensure you
get the very best from your purchase.

Safety is Important

To ensure your safety and the safety of others, please read the Safety
precautions before you operate this DVD Recorder.
Keep this information in a safe place for future reference.
WARNING! THIS DVD RECORDER UTILISES A CLASS 1
LASER.
PROCEDURES NOT LISTED IN THIS USER GUIDE MAY
RESULT IN HAZARDOUS RADIATION EXPOSURE.
NOTE: This DVD Recorder incorporates copyright
protection technology that is protected by method claims of
certain U.S. patents and other intellectual property rights
owned by Macrovision Corporation and other rights owners.
Use of this copyright technology must be authorised by
Macrovision Corporation, and is intended for home and
other limited viewing uses only, unless otherwise
authorised
engineering or disassembly is prohibited.

Region Code

If you load a disc which has a different region code to your DVD
Recorder you will see the region code notice on the screen. The disc will
not playback and should be unloaded. The region code for this DVD
Recorder is 2 (refer to the symbols below).
2
USE OF CONTROLS,
by Macrovision
ADJUSTMENTS
Corporation. Reverse
OR