Initial Setup - Alba RDVD1002 User Manual

RDVD1002.book Page 14 Tuesday, January 24, 2006 12:25 PM
RDVD1002

Initial Setup

Starting the Initial Setup Wizard
When you switch on your DVD Recorder for the first time, you will need
to complete the initial setup wizard.
Press the STANDBY button to turn the DVD Recorder on. The Initial
Setup Wizard will appear as shown below.
Press the PLAY/ENTER button to begin the Initial Setup Wizard.
Entering the Date Time Settings
The DVD Recorder requires the correct date and time to be set for timer
recordings to be performed. The Date Time Settings screen will appear
as shown below.
Use the LEFT and RIGHT ARROW buttons to select the Day (D), Month
(M), Year (Y), Hours (H) and Minutes (M). To adjust the selection, use
the UP or DOWN ARROW buttons or alternatively enter a value using
the NUMERIC buttons.
Once the correct date and time have been set, press the PLAY/ENTER
button.
14