American DJ Wave User Instructions page 5

Wave
1. The Wave uses 2 DMX channels. Channel 1 controls the rotation
speed of the lamp, and channel 2 controls the strobe effect. See
page 10 for detailed description of the DMX traits.
2. To control your fixture in DMX mode, follow the set-up proce-
dures on pages 5 - 7 as well as the set-up specifications that are
included with your DMX controller. Assign a DMX address to the
unit.
3. Use the controller's faders to control the various DMX fixture
traits.
4. This will allow you to create your own programs.
5. For help operating in DMX operation consult the manual included
with your DMX controller.
6. For longer cable runs (more than a 100 feet) use a terminator on
the last fixture.
American DJ - www.americandj.com - Wave Instruction Manual Page 9
© ®
Operation Wave
Stand by Blackout the unit
Function 1. Strobe in synchroflash
Mode
Wave
Channel
1
2
American DJ
©
1.Slow speed clockwise
2. Strobe in 2-light show 2.Slow speed counterclockwise
Sound (LED OFF) Slow (LED ON)
Value
0 - 7
8 - 130 CLOCKWISE ROTATION
131
132 - 255 COUNTERCLOCKWISE ROTATION
0 - 7
8 - 247 SLOW
248 - 255
- www.americandj.com - Wave Instruction Manual Page 10
®
BC 30 Controls
DMX Traits
Function
LAMP ROTATION
NO ROTATION
FAST SLOW
NO ROTATION
SLOW FAST
STROBE
BLACKOUT
FAST STROBE
FULL ON