Related Manuals for MYE MWC2-8
Summary of Contents for MYE MWC2-8
-
Page 1: Operation Manual
MWC2-8 Radio MWC2-8 800MHz Receiver with FM Radio Option Operation Manual man_MWC28_V8 www.myeclubtv.com... -
Page 2: Table Of Contents
Product Description The MYE MWC2-8 Receiver allows the user to listen to a TV or other audio source connected to a compatible 800MHz transmitter. It can also be used as an FM radio receiver. The MWC2-8 is powered by using a MYE Entertainment CSAFE cable plugged directly into any standard cardio CSAFE port or MYE 9 Volt AC Adapter. -
Page 3: Receiver Orientation (Front / Rear)
RECEIVER ASSEMBLY - FRONT VIEW LCD DISPLAY FRONT MOUNTING SCREWS UNSCREW TO RELEASE the MOUNTING BASE ASSEMBLY. (PLEASE READ “ATTACHING FRONT FLANGE THE RECEIVER” PGS. 8/9) KEYPAD HEADPHONE JACK CABLE EXIT HOLES RECEIVER ASSEMBLY & MOUNTING - REAR VIEW BAR CODE SERIAL NUMBER AND RATING LABEL FRONT MOUNTING SCREWS... -
Page 4: Keypad - Key Identification
Model: MWC2-8 The MYE MWC2-8 Receiver allows the user to listen to a TV or other audio source connected to a compatible 900MHz transmitter. It can also be used as an FM radio receiver. The MWC2-8 is powered by using a MYE Entertainment CSAFE cable plugged directly into any standard cardio CSAFE port or MYE 9 Volt AC Adapter. -
Page 5: Display And Icon Identification
INDICATOR EQ PRESETS Programming - Far/Near Reception This feature provides the ability to set the reception sensitivity of each MYE Entertainment MWC2-8 receiver depending on the proximity between the receiver and transmitter. Far Mode: (Default): The far mode is the most widely used and will accommodate the majority of installations. -
Page 6: Programming The Receiver (Auto Programming)
MYE Entertainment transmitters or other brands of transmitters listed below. The receiver features both “auto” and “manual” program modes. In the auto mode the MWC2-8 will automatically search for and program in your transmitters. The manual mode provides the ability to add or erase a specific transmitter channel or unwanted frequency caused by spurious emissions or other local elements. -
Page 7: Fm Radio, Fm Radio Disable
FM RADIO Pressing the “FM” key switches the audio reception mode from 800MHz to FM. The FM Radio option is set to receive FM radio broadcasts from 87.5 to 107.9. Use the SCAN key to scan automatically up to next available FM channel. Use the channel UP / Down keys to move up / down one FM frequency at a time. -
Page 8: Attaching The Receiver
Atta ching the Receiver The MWC2-8 receiver uses the Secure Grip Mounting Band. Mounting the receiver is now quick, secure and discrete. It is required that the Secure Grip Mounting Band always be used when installing MYE Entertainment MWC2-8 receivers. - Page 9 *USE only MYE Entertainment CSAFE cables or 9 volt power supplies with all MYE Entertainment receivers (900MHz, 800MHz or FM). MYE Entertainment will not be responsible for damage to receivers or cardio equipment when alternate or other cables or power supplies are used.
-
Page 10: Intellijack
2. Carefully insert new IntelliJack module without bending contact pins. 3. Reset the Icon. Turn MYE Entertainment receiver OFF then press and hold the “Power” button for 3-4 seconds. When the “headphone” icon appears again release the Power button. -
Page 11: Warranty Information
THIS WARRANTY IS VALID ONLY IN ACCORDANCE WITH THE FOLLOWING CONDITIONS: THE WARRANTY APPLIES TO THE MYE ENTERTAINMENT PRODUCT ONLY 1) WHILE IT REMAINS IN THE POSSESSION OF THE ORIGINAL PURCHASER AND PROOF OF PURCHASE IS DEMONSTRATED. 2) IT HAS NOT BEEN SUBJECT TO ACCIDENT, MISUSE, ABUSE, IMPROPER SERVICE, MECHANICAL OR ELECTRICAL NON-MYE ENTERTAINMENT AUTHORIZED MODIFICATION. - Page 12 EXPRESS WARRANTIES GIVEN ABOVE FOR THOSE SAME PARTS. MYE ENTERTAINMENTHEREBY DISCLAIMS AND EXCLUDES THOSE WARRANTIES THEREAFTER. SOME STATES DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATION MAY NOT APPLY TO YOU. MYE ENTERTAINMENT ALSO HEREBY DISCLAIMS AND EXCLUDES ALL OTHER OBLIGATIONS OR LIABILITIES,...
Need help?
Do you have a question about the MWC2-8 and is the answer not in the manual?
Questions and answers