Linear Power Series TO-3 Owner's Manual And Installation Manual

™
F O R T H E L O V E O F M U S I C
MODEL 2.2HV
Series TO-3
(1998-MSRP: $699.00)
OWNER'S MANUAL AND
INSTALLATION GUIDE
INTRODUCTION
Latest technology, high sound quality, powerful delivery and LINEAR POWER™
reliability all describe LINEAR POWER™ amplifiers. With new "HV" circuitry,
their value increases. Versatile capabilities such as stereo, mono or mixed
stereo/mono operation and 2 ohm capability make these amplifiers extremely
desirable to build an entire system around or begin a system.
TECHNICAL DESCRIPTION
The "HV" series amplifiers are a series of amplifiers based around our dedication
to high voltage designed products. These amplifiers have an inverted channel,
and quiet turn on circuit has been added for improved sound performance. The
amplifier design incorporates a new proprietary hybrid mosfet driven bipolar
power supply for increased dynamic headroom and efficiency. The TO-3 output
stages of these amplifiers will deliver a significant increase in power into 2-ohm
stereo loads. Amplifier reliability is accomplished by operating the output
transistors at 50% of their maximum rating.
WIRING
Disconnect battery ground cable before making any power connections.
RED WIRE: +12 volts. Connect directly to battery positive terminal and should be
fused within 18 inches from the battery and another fuse where the connection to
the amplifier is made. Remember to use the proper size fuses. WARNING:
USING OVERSIZED FUSES IS DANGEROUS AND WILL DAMAGE YOUR
AMPLIFIER! See specifications for proper fuse size.
© 2008 Linear Power, Inc. - ALL RIGHTS RESERVED
1
.
LINEAR POWER™ is a trademark of Linear Power, Inc