Grizzly H0800 1200W Instruction Manual

1200w and 1800w 110v - 120°c to 590°c (248°f to 1094°f)

Table of Contents

Download this manual

HEAT GUN

MODELS H0800 1200W AND H0801 1800W

110V - 120°C TO 590°C (248°F TO 1094°F)

INSTRUCTION MANUAL

WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE

OR FORM WITHOUT THE WRITTEN APPROVAL OF GRIZZLY INDUSTRIAL, INC.

307100624 OCTOBER, 2000 PRINTED IN CHINA

Table of Contents

Do you have a question about the H0800 1200W and is the answer not in the manual?

Page 1: Instruction Manual
110V - 120°C TO 590°C (248°F TO 1094°F) INSTRUCTION MANUAL COPYRIGHT © 2000 BY GRIZZLY INDUSTRIAL, INC. WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE OR FORM WITHOUT THE WRITTEN APPROVAL OF GRIZZLY INDUSTRIAL, INC. 307100624 OCTOBER, 2000 PRINTED IN CHINA...
Page 2 TABLE OF CONTENTS SAFETY INSTRUCTIONS WARNINGS III. STRIPPING OF PAINT OR VARNISH REMOVAL OF ADHESIVE FLOOR TILE OTHER JOBS IMPORTANT VII. SERVICE...
Page 3 * Nozzle gets extremely hot when running the gun. Wear gloves for hand protection. Do not touch the nozzle while running or shortly after running the gun. * High temperatures may cause damage to most materials. Test before using heat gun on temperature sensitive material.
Page 4 * Keep the gun handle dry, clean, and free from oil and grease. * Always allow the heat gun to cool down completely before storing it. * Always store the gun in a safe place, out of the reach of children. It is not a toy.
Page 5 Do not use paper or cloth dust masks. REMOVAL OF ADHESIVE FLOOR TILE Under high heat, floor tile adhesives will soften. Point heat gun to small area and lift tile with a scraper, moving the heat gun ahead as tile lifts.
Page 6 * Keep the air intake and outlet opening clean and free of dirt and debris. * Do not use gasoline, lacquer, turpentine or similar substances to clean the tool or work piece. Do not immerse any part of the heat gun into a liquid or let any liquid inside the gun.

H0801 1800wH0800H0801