Table of Contents
Advertisement
Silencer
®
automotive security products have been developed through years of research and development to
provide the consumer with a product that is technologically advanced and easy to use. This manual will
provide a ready reference to the operation and maintenance of your new Silencer security system. To test
and operate the features of your new system, follow the procedures stated in this manual.
Please note that (2) Silencer security system models are covered in this manual:
Model 7905P is an automatic arming starter disable system that can be controlled by the factory installed
keyless entry system or by a Silencer security disarm key.
Model 7909P is an automatic arming starter disable system and full security system that can be controlled
by the factory installed keyless entry system or by a Silencer security disarm key.
Basic Operation
This section details the simple day-to-day operation of your Silencer security system.
System Arming
The 7905P will automatically arm 30 seconds after the ignition key is turned to the "Off" position. The
LED light will flash when the system becomes armed.
Note 1: If your vehicle has a factory installed Remote Keyless Entry System, anytime that you "Lock" the
doors using the remote control, the 7905P starter disable system will become armed.
Note 2: The automatic arming is programmable and can be turned off. Your vehicle must have a factory
installed Remote Keyless Entry System to arm and disarm the system.
System Disarming
1. If your vehicle has a factory installed Remote Keyless Entry System, press the "Unlock" button on the
remote transmitter to unlock the doors. This action will disarm your Silencer system. You have 60
seconds to enter the vehicle and start the engine.
2. If your vehicle does not have a factory installed Remote Keyless Entry system, you were provided a set
of coded keys to disarm your Silencer system. Enter the vehicle and insert your coded key into the
underdash receptacle. Remove the key. You now have 30 seconds to start the engine.
Optional Features
Optional Beeping Horn System Status and Warning: (When Installed)
When the beeping horn option is installed, every time the unit becomes armed the horn will beep one
time. When you disarm the system by inserting the Silencer key into the receptacle or pressing the
"Unlock" button on your keyless entry transmitter, the horn will beep 2 times indicating a disarmed
condition.
If you forget to disarm your Silencer system, the horn will begin to sound when you try to start your
vehicle. Turn off the ignition key and either press the "Unlock" button on your keyless entry transmitter
or insert your Silencer key into the receptacle and remove it. You can now start your vehicle.
2
7905P
Advertisement
Table of Contents
