Subscribe to Our Youtube Channel
Related Manuals for Silencer 30SL
Summary of Contents for Silencer 30SL
- Page 1 USERS MANUAL This unit is designed for professional installation only. For Warranty Information: Please visit our website at www.magnadyne.com...
-
Page 2: Remote Control Transmitters
Activate Car-Jacking Ignition in “ON” Position. Button for 1 Seconds (OPTIONAL) SILENT LOCK / UNLOCK or CH4 Must be Programmed to Use as CH4. Switching Code for Press and hold until TX LED is “ON” 2nd Car Operation. UM-FULL-30SL rev A... -
Page 3: Chirp Indicators
The sensor bypass feature is programmed to activate for one arming cycle only. The security system will return to normal operation during the next arming cycle. Sensor By-Pass : Press the button two times within 5 seconds to arm the security system and by-pass the shock sensor. UM-FULL-30SL rev A... -
Page 4: Active Disarming - Unlock & Disarm
1. Enter the vehicle and turn the ignition switch to the ‘ON’ position. 2. (Alarm will sound.) 3. Within 10 seconds push and release the valet switch. The alarm will stop sounding and enter the disarm mode. You can now start and operate the vehicle normally. UM-FULL-30SL rev A... -
Page 5: Valet Mode
“Noise Abatement Circuit” covers doors (Hood/Trunk) differently: If the alarm is triggered by an open door for three full cycles, the doors will be bypassed until the trigger ceases. UM-FULL-30SL rev A... - Page 6 “ON” and /or unlock the vehicle’s doors when the ignition is turned “OFF”. (Default setting is “OFF”) TRUNK RELEASE, (CHANNEL 3) OUTPUT Press and hold the button on the transmitter for three seconds to remotely control the trunk release. UM-FULL-30SL rev A...
-
Page 7: Shock Sensor Adjustment
Note: If 30 seconds of inactivity expires, or you turn on the ignition during of above steps, the unit will exit the program mode and return to the disarmed mode. Three long chirps will confirm exit. UM-FULL-30SL rev A... - Page 8 SILENCER LIMITED LIFETIME WARRANTY Magnadyne Corporation or its authorized agents will, for the life of the vehicle and to the original purchaser, repair, replace or refund the retail sales price of said product or any part thereof, at the option of the Magnadyne Corporation or its authorized agents, if said product or part is found defective in materials or workmanship, when properly connected and operating on the correct power requirements designated for the specific product.
- Page 9 Magnadyne Corporation 1111 W. Victoria Street Compton CA 90220 (800) 340-3200 Please visit our website at www.magnadyne.com Made in Taiwan. All Rights Reserved...
Need help?
Do you have a question about the 30SL and is the answer not in the manual?
Questions and answers