Scientific Atlanta Explorer 3250HD User Manual page 12

Activate the
RF Bypass
Module
Deactivate the
RF Bypass
Module
12
Press and hold the Bypass key on
the remote control. The Bypass
indicator on the front panel of the
set-top will illuminate. Note: Your
remote control may have a Video
Source key instead of a Bypass key.
• You can only view analog
channels; digital channels are not
available for viewing on your TV
1. Press and briefly hold the Bypass
key on the remote control. The
Bypass indicator no longer
illuminates on the Explorer
Set-Top.
2. Tune your TV using one of the
following methods:
• If the TV/VCR switch on your
VCR is in the VCR position, you
must tune your TV to the VCR
output channel (channel 3 or 4).
screen. However, you can record
either analog or digital channels
on your VCR while the Bypass
feature is active.
• Use the Bypass key on the remote
control to activate and deactivate
the Bypass feature.
You can view a tape, or you can
view the channel to which the
Explorer Set-Top is tuned.
• If the TV/VCR switch on your VCR
is in the TV position, you must
tune your TV to the Explorer
Set-Top output channel (channel
3 or 4). You can only view
programs from the Explorer Set-
Top, regardless of what your
VCR is playing.