Advertisement
Assembly instructions
Your Catrike should be fully assembled, tested and fine tuned by your Catrike dealer or local bike store. Here are the assembly
instructions in order to show how this process is done.
The first step is to inventory the parts:
A complete trike includes:
• Main frame with cups for headsets in place. The idler pulley and chain tube also are pre-assembled and installed on
the frame. The quick-release boom clamp is also installed.
•Boom.
•Seat mesh.
•One tie rod with two right hand thread aluminum rod-end bearings, jam nuts, and tie rod bolts installed.
•Two spindle/axle assemblies with headsets, hollow axles, axle spacers (when required), and dust caps installed.
•Adjustable handlebars.
•A plastic boom shim.
•Quick-release rear wheel skewer.
•Brake cables and two lengths of brake cable housing.
•Gear cable housing.
•Cable ferrules and cable ends.
•Flag mount.
•Safety flag.
•Derailleur hanger with screw.
•Computer sensor mount
•Space Neck Rest (for Road, Speed, Expedition and 700)
•Two front wheels with tubes and tires installed.
•One rear wheel with tube and tire installed.
•Disk brakes
•Brake levers
•Shifters
•Cassette
•Crank Set
•Front derailleur
•Rear derailleur
•Bottom bracket
•Chain with (1) MasterLink
•Mirror
Other accessories such as a rack, or fenders may also be in the box.
owner's manual - page 10
TM
Hide quick links:
Advertisement
