Download Print this page

Jason International Integrity B3060 Owner's Manual

Soaking baths

Advertisement

Quick Links

"to be removed for use by the occupant."
Jason International, Inc.
8328 MacArthur Drive
North Little Rock, AR 72118
www.jasoninternational.com
INsTallaTION, OPeraTION, aND MaINTeNaNCe
If the carton shows sign of damage, inspect
the product before accepting and describe the
problem on the Bill of lading.
INSPECTION
Inspect the unit prior to installation. In the event of a problem, DO
NOT install the unit. All components are factory assembled onto
the bath and the unit is water tested and inspected prior to
leaving the factory.
The installer is responsible for inspecting the unit to insure that
it is free from defects and/or shipping damage. The factory
is not responsible for damage that might have been avoided
by inspection or testing prior to installation.
NOTe: Transportation and insurance from Jason's factory are
the buyer's responsibility.
Damage sustained in transit is the responsibility of the carrier.
The owner or installer MUST open, uncrate, and
inspect the unit for damage when it is delivered. Inspect
plumbing and surface for missing or damaged components.
Alert the dealer of any discrepancies. If damage is discovered,
immediately notify the carrier in writing and request that they
have a representative inspect the unit. If the carrier fails to
respond, report it to the seller and carrier. Always file a freight
claim promptly.
CauTION: DO NOT lIFT Or haNDle The BaTh BY ITs PluMBING.
OwNer's reCOrD
Dealer:
Date Purchased:
Date Installed:
Installer:
Jason International, Inc. • 501.771.4477
OwNer's MaNual
Integrity
soaking Baths
®
Page 1 of 6
Damage to the unit during installation will not be covered
by warranty and is the responsibility of the installer. all
warraNTY ClaIMs ON aCrYlIC surFaCe DaMaGe MusT Be
MaDe PrIOr TO INsTallaTION.
To protect the unit from damage, keep the bath in its carton
until ready for installation.
EQUIPMENT ACCESS
In accordance with Building Codes, service access to all
therapy bath equipment, controls and electrical connections
must be provided during installation. (Refer to Table 1 -
specifications on page 2 for minimum access size.) Insufficient
access will hinder repair and maintenance. Warranty service
will not cover the cost of providing equipment access.
Jason offers an optional removable lateral skirt for all
rectangular baths. The skirts are available in matching acrylic
colors and provide convenient access to bath equipment as
well as an excellent finished appearance.
PlaCe serIal NuMBer CarD wITh
PrODuCT CONFIGuraTION IN ThIs BOx
49-1000-023
Date 07/10
Customer Service : 800.255.5766
Copyright © 2010 Jason International.

Advertisement

loading

Summary of Contents for Jason International Integrity B3060

  • Page 1 CauTION: DO NOT lIFT Or haNDle The BaTh BY ITs PluMBING. OwNer’s reCOrD PlaCe serIal NuMBer CarD wITh PrODuCT CONFIGuraTION IN ThIs BOx Dealer: Date Purchased: Date Installed: Installer: Jason International, Inc. • 501.771.4477 Page 1 of 6 Customer Service : 800.255.5766 Copyright © 2010 Jason International.
  • Page 2: Installation Instructions

    168 x 107 x 52 72 x 42 x 20.5 38.5 J4272 183 x 107 x 52 TaBle 1 - sPeCIFICaTIONs (cont.) Integrity soakers Jason International, Inc. • 501.771.4477 Page 2 of 6 Customer Service : 800.255.5766 Copyright © 2010 Jason International.
  • Page 3: Installation

    1" X 2" [5 X 10 cm ] S U P P O R T BaTh wITh INTeGral TIle FlaNGe Figure 2 Jason International, Inc. • 501.771.4477 Page 3 of 6 Customer Service : 800.255.5766 Copyright © 2010 Jason International.
  • Page 4 (2) inches of water. The incoming water temperature should not exceed 104°F (40°C). 2. Inspect the plumbing for leaks. Jason International, Inc. • 501.771.4477 Page 4 of 6 Customer Service : 800.255.5766 Copyright © 2010 Jason International.
  • Page 5: User Maintenance Instructions

    WARRANTy REGISTRATION: Register your product's warranty online at www.jasoninternational.com. JasON INTerNaTIONal INC. lIMITeD warraNTY The Company warrants the products of its own manufacture to be free from defects in workmanship and material for a period of twelve (12) months from date of installation or eighteen (18) months from date To obtain warranty service, you must contact the retailer from which the merchandise was purchased of manufacture, whichever comes first.
  • Page 6: Important Safety Instructions

    CODes wheN INsTallING ThIs PrODuCT. saVe These INsTruCTIONs Jason InternatIonal, Inc. 8328 MacArthur Drive • North Little Rock • Arkansas • 72118 www.jasoninternational.com Jason International, Inc. • 501.771.4477 Page 6 of 6 Customer Service : 800.255.5766 Copyright © 2010 Jason International.

This manual is also suitable for:

Integrity b3260integrity b3260 slIntegrity b3260 srIntegrity b3660 integrity srIntegrity b3660 slIntegrity b3660 srIntegrity b3666 ... Show all