White Balance; External Flash Control; Sequence Shooting; Image Processing - Olympus E-PL1 Specifications

White Balance

AUTO WB system
Manual White balance (One-
Touch)
White balance bracketing
One-touch white balance
White balance adjustment
Custom WB
Preset values

Sequence Shooting

Speed (H)
Max. number of frames
Conditions

Image Processing

Colour space
Sharpness + Contrast
Saturation
Black & White filter
Black & White toning
Picture mode
Gradation
Specifications and appearances are subject to change without any notice or obligation on the part of the manufacturer
Advanced detection system
with Live MOS sensor
Yes
3 frames / +/- 2, 4, 6mired
steps
1 custom settings can be
registered
+/- 7 in each A-B / G-M
axis (in Auto WB, preset WB
mode & one-touch WB)
1 setting can be registered at
Kelvin temperature (2000K -
14000K)
Tungsten
Flourescent 1
Flourescent 2
Flourescent 3
Sunlight
Flash
Overcast
Shade
Approx. 3fps
10 frames (RAW)
12 frames (JPG / Large
Normal mode)
Memory card: Toshiba Super
High Speed type ￿Class 6￿
4GB
sRGB / AdobeRGB
5 levels
5 levels
Yellow, Orange, Red, Green
Sepia, Blue, Purple or Green
in Black & White mode
i-Enhance, Vivid, Natural,
Portrait, Muted, Monotone
4levels (auto, high key,
normal, low key)

Internal Flash

Guide number
Type
X-sync speed
Modes

External Flash Control

X-sync speed
Type
Modes
Intensity
7 (ISO 100)
Built-in carabiner
1/160s / 1/2000s (Super FP
Mode)
FP TTL Auto
FP Manual
TTL-Auto
AUTO
Manual (Full, 1/4, 1/16, 1/64)
Red-eye reduction
Slow synchronisation
Slow synchronisation 2nd
curtain
Slow synchronisation with
red-eye reduction
Fill-in
Off
1/160s / 1/2000s (Super FP
Mode)
TTL AUTO, AUTO, MANUAL,
FP TTL AUTO, FP MANUAL
Auto
Red-eye reduction
Slow synchronisation
2nd curtain and slow
synchronisation
Fill-in for exclusive flash
Manual
Slow synchronisation with
red-eye reduction
+/- 3 EV ( 1, 1/2, 1/3 EV
steps )
Note: Some functions are
only available if they are
supported by the external
flash.