Antenna
Channel selector
Rotate to change the operating channel.
•
To change the operating frequency or QT/DQT settings of a
channel, refer to "CHANNEL SETUP" on page .
Channel Annunciation: When changing channels, the
•
transceiver will announce the newly selected channel number.
(This can be deactivated by your dealer.)
LED indicator
For the LED indicator status, refer to page 7.
Power switch/ Volume control
Turn clockwise to switch the transceiver ON. To switch the
transceiver OFF, turn counterclockwise until a click sounds.
Rotate to adjust the volume level.
PTT (Push to Talk) switch
Press and hold, then speak into the microphone to transmit.
6
ORIENTATION
Battery pack