Samsung SMT-1930 User Manual page 15

USER'S MANUAL USER'S MANUAL
Press the PIP button on
the remote control repeatedly
to activate or deactivate
the "PIP".
5. Press the / button to select "Source", then
press ENTER button. Select a source of the sub
picture by pressing the
ENTER button.
6. Press the / button to select Size menu, then
press the ENTER button .
7. Press the /
and ENTER
you want (
8. Press the / button to select "Position", then
press the ENTER button. Select the position of the
sub picture by pressing the
press the ENTER button(
9. Press the MENU button to exit.
Note:
is the PBP function.
Setting up Your PC Software
(Based on Windows XP)
The Windows Display Properies for a typical
computer are shown above. The actual screens
on your PC may be different depending upon
your particular version of Windows and your
particular video card. Even if your actual screens
look different, the same, basic set-up information
will apply in almost all cases. (If not, contact your
computer manufacturer or Samsung Dealer.)
1. First, click on "Control Panel" on the Windows start
menu.
2. When the control panel window appears, click on
"Display" and a Display Properies window will
appear.
3. Click on "Setting" .
/ button and press the
button to select the size
).
/ button and then
).
4. Navigate to the "Screen resolution" tab on the
Setting window.
The correct size setting (resolution):
Optimum- 1366 x 768
If a vertical-frequency option exists on your Settings
window, the correct value is "60Hz" or "75 Hz".
Otherwise, just click "OK" and exit the window.
Display Modes
Both screen position and size will vary depending
on the type of monitor and its resolution.
The resolutions in the table are recommended. (All
resolutions between the supported limits are
supported.)
The interlace mode is not supported.
The set might operate abnormally if a non-standard
video format is selected.
Separate and Composite modes are supported.
SOG is not supported.
- 15 -