Fisher M-Scope ID EDGE Operating Manual page 7

CONTROL PANEL
B. The VOLUME control can be varied from a setting of V1 TO
V9 with the arrow buttons when the "V" icon is flashing,
DISCRIMINATION CHART (APPROXIMATE)
LOW
TONE
IRON
C. The SENSITIVITY control can be varied from a setting of 1 to
a maximum of 10 with the arrow buttons when the SENS icon
is flashing. As with most detectors, set the sensitivity higher for
best depth performance in soils that are low in mineralization.
As the mineralization gets worse, lower the sensitivity setting
as needed. Please note that a SENS setting of 1 will still yield
excellent results.
Remember, to exit the MENU mode at any time, simply press &
release the PINPOINT button to return to the SEARCH mode
0
-36 +36
SILVER
& COPPER
FOIL
+7
+18
+22
ZINC
PENNY
LOW
TONE
LOW-MID
TONE
MID-HIGH
TONE
HIGH
TONE
NICKELS
PULL TABS
+17
BRASS
5