Lipinski Sound L-505A User Manual page 20

L-301 Main Speaker Amplifier – rear panel
1. Input signal Sensitivity switch: Normal
(0db) or High (+5db),
2. Mode switch: Bi-amp or Bridge,
3. Input Source: Unbalanced or Balanced,
4. Balanced XLR signal input,
5. Unbalanced RCA signal input,
6. High Pass Filter mode switch,
7. Balanced XLR signal output,
8. Unbalanced RCA signal output,
9. Front Hue light mode switch,
10. A Speaker (+) and (-) out connector*,
11. B Speaker (+) and (-) out connector*,
12. Main voltage switch 115/230V,
13. Power mode switch: On or Auto,
14. Stand-by LED,
15. Main power switch,
16. Ground lift switch,
17. Main power cord,
18. Fuse.
*for Bridge mode use (+) A and (+) B terminal.
Lipinski Sound Corporation| Confidential Copyright © 2008 20 | P a g e