Table of Contents
Advertisement
Technical staff manual
7.6.3. Mounting a hose is necessary to begin with the non-movable elements of the hose which have a pipe
cylindrical thread (if a counterpart is stationary).
7.6.4. Sealing of the fitting's threaded joint with a counterpart (radial connection) must be made using a Teflon tape
sealing material (FCM) or sealant that provides air-tightness of the threaded joint.
7.6.5. The threaded joint of the captive nut (end connection), for the movable and also non-movable parts
with a counterpart fitting must be performed applying gaskets. Gasket material- oil and petrol resistant
rubber or polytetrafluorethylene.
.
18
Advertisement
Table of Contents
