Compare Firmware; H/W Diagnostic - Acard ARS-2030L User Manual

ARS-2030L/2032 Manual
You can get the newest firmware version from ACARD by e-mail, or download it
directly from the web site: http://www.acard.com Then, unzip the file "cdxxx.bin"
and copy it into a blank CD.
After placing the CD on the CD-ROM , press ENT. The system will begin searching
the new firmware and show the message on LCD as follows after it finds the new
firmware. Then press ENT to update.

4.12.8 Compare Firmware

On the above figure press ESC and
Firmware is to compare the current firmware version and the newly downloaded
version. It can prove if the downloaded version is the newest one.

4.12.9 H/W Diagnostic

M
Press ESC and to enter the next figure. H/W Diagnostic is to test the system.
Searching F/W---
XXX/XXXXX
M
to enter the following figure.Compare
12-08. Adv Setup
Compare Firmware
12-09. Adv Setup
H/W Diagnostic
60