Important Owner Information; General Information - Bg Z-1 Owner's Manual And Setup Procedures

General Infomation
Important Ownership information
Read and Follow Instructions – Please read
this entire manual thoroughly before unpacking
and setting up your BG Z-Series loudspeakers.
For maximum performance and years of trouble-
free enjoyment, all operating and use instructions
should be followed.
Retain – DO NOT discard any factory packing
material. The packing and shipping materials may
be required in the unlikely event your loudspeak-
ers need to be moved or shipped to another loca-
tion or be serviced.
Cleaning – Use a wax-free cleaning substance
only (i.e. Pledge™) with a soft, dry polishing cloth
not a paper-based chamois. DO NOT apply any
cleaning solutions to the grill cloth.
Liquid – DO NOT place BG loudspeakers near
an open source of liquid that may spill on the
loudspeaker surfaces.
Heat – DO NOT place BG loudspeakers near a
direct heat source.
Tipping – Place your loudspeakers on a smooth
flat surface and with the Z-7 tower, use the en-
closed spiked feet on carpeted surfaces. A loud-
speaker tipping over can pose a hazard for small
children and pets.
General Considerations
Break-In Times: Typically a BG loudspeaker
requires not less than 48 hours of operation at
moderate sound level before reaching its opti-
mum sound quality. This improvement may be
rather subtle but noticeable for a trained listener.
Note: Do not play your loudspeakers excessively
loud to try to accelerate this process!
Amplifier: BG loudspeakers are extremely ac-
curate and deliver a high degree of detail and
resolution. Therefore a good 100-150 watt per
channel amplifier or receiver will deliver adequate
power for a typical system and room size. Your
authorized BG dealer can recommend an ampli-
fier best suited to your needs.
4