Century FW3000 Installation And Operation Manual page 42

Century FW3000 Installation and Operation Manual
When using the fan, allow the stove to reach operating temperature (approximately one
hour), before turning it on. The increased airflow from the fan cools the firebox and could
affect the start-up combustion efficiency if the fan is turned on too early. You can also
install a thermodisc to enable the blower to start or stop automatically when the stove is
hot or too cold. The thermodisc part number is AC05530 for a basic model and ACO2055
for a quick connect model. Installation instructions are supplied with the blower and the
thermodisc.
CAUTION: ENSURE THAT THE FAN'S POWER CORD IS NOT IN CONTACT WITH
ANY SURFACE OF THE STOVE TO PREVENT ELECTRICAL SHOCK OR FIRE
DAMAGE. DO NOT RUN THE POWER CORD BENEATH THE STOVE.
42