Table of Contents
Advertisement
IMPORTANT: Read this section carefully and follow the instructions outlined before starting up the machine.
Failure to follow the procedures outlined in this manual may result in personal injury to the operator or bystanders,
or in damage to the machine.
Pre-Startup
Operation of the Grizzly must be restricted to operators who have read and completely understand all Safety
Rules, Precautions and Operating Functions of both Tractor (carrier) and the Alamo Grizzly.
Do not operate the carrier or the Grizzly when tired, ill or under the influence of drugs, alcohol or medication.
The greatest danger when operating the machine is the possibilty of the cutting head throwing debris, wood,
rocks, etc., from under the shroud. To minimize this danger:
Walk around the Grizzly and check it thoroughly for damage, loose bolts, missing cotter pins and wire or
rope etc., possibly wrapped around the shaft.
Peform the operations outlined on the following Daily Check List.
Check:
Grizzly to carrier mounting pins for security & wear
Grizzly frame and shroud for damage
Motor and motor baseplate bolts for security
Check all mounting adapter bolts
Lubricate:
Upper and lower bearing. Use Shell EP2 or equal.
Do not over-grease, one pump of a hand gun is
usually sufficient. Over-greasing will cause high
bearing housing temperature.
Remove:
Material bulid-up inside shroud
WARNING!
The comsumable wear parts are constructed of specially treated steel of specific composition
to withstand the stresses of operation on the Grizzly. Replace ONLY with genuine Alamo
replacement parts. DO NOT repair if damaged, other than routine sharpening as described in
the Maintenance Section.
GRIZZLY 52 01/05
© 2005 Alamo Group Inc.
OPERATION
DAILY CHECK LIST
Check all cutter blades/bits for condition & retention
Main shaft and cutters for wire, rope or other
material wrapped around
Hydraulic lines & connections for chafing, leaks or
looseness
Hydraulic oil level in tank, top up as necessary
Grizzly to carrier hinge pin, again with ordinary,
good quality grease
Operation Section 4-2
Advertisement
Table of Contents
