Ford FOCUS 2013 Owner's Manual page 303

302
WARNING: Do not attempt to change a tire on the side of the
vehicle close to moving traffic. Pull far enough off the road to
avoid the danger of being hit when operating the jack or changing the
wheel.
WARNING: Always use the jack provided as original equipment
with your vehicle. If using a jack other than the one provided as
original equipment with your vehicle, make sure the jack capacity is
adequate for the vehicle weight, including any vehicle cargo or
modifications.
Note: Passengers should not remain in the vehicle when the vehicle is
being jacked.
1. Park on a level surface, set the parking brake and activate the hazard
flashers.
2. Place the transmission selector lever in position P or N and turn the
engine off.
5. Remove the lug wrench and jack from the foam holder.
7. Loosen each wheel lug nut one-half turn counterclockwise but do not
remove them until the wheel is raised off the ground.
2013 Focus (foc)
Owners Guide gf, 3rd Printing, November 2012
USA (fus)
Wheels and Tires
3. Remove the carpeted wheel
cover.
4. Remove the wing nut and bolt
assembly that secures the spare tire
and jack by turning it
counterclockwise.
6. Block the diagonally opposite
wheel.