Audio Connections - Alto OEX-400 User Manual

4. AUDIO CONNECTIONS

You can connect unbalanced equipment to balanced inputs and outputs. Simply follow these schematics.
Ring=Right Signal
Tip
Sleeve
Ring
Strain Clamp
Tip=Left Signal
Sleeve=Ground/Screen
Use for Headphone
1/4" Stereo (TRS) Jack Plug
Tip
Sleeve
Tip=Signal
Strain Clamp
Sleeve=Ground/Screen
Use for Mono Line In, Mono 1/4"Jack Plugs
1/4" Mono (TS) Jack Plug
Ring=Return Signal
Tip
Sleeve
Ring
Strain Clamp
Tip=Send Signal
Sleeve=Ground/Screen
Use for Insert Points
1/4" Stereo (TRS) Jack Plug
2 2
1 1
2=Hot(+) 2=Hot(+)
1=Ground/Screen 1=Ground/Screen
3 3
3=Cold(-) 3=Cold(-)
Use for Balanced Mic Inputs Use for Main output
(For unbalanced use, connect pin 1 to 3) (For unbalanced use, leave pin 3 unconnected)
3-pin XLR Male Plug 3-pin XLR Line Socket
(seen from soldering side) (seen from soldering side)
11