Memory Configurations; Installing A Dimm - Asus A7N8X Series User Manual

2.5.2 Memory configurations

Install DIMMs in any of the following combinations.
DIMM Location
Socket 1 (Rows 0&1)
Socket 2 (Rows 2&3)
Socket 2 (Rows 4&5)
Total system memory (Max. 3GB)
NOTE:
when installing additional DIMMs. You may install the DIMMs in the
following sequence: Sockets 1 and 3 or Sockets 2 and 3 or Sockets 1,
2 and 3.

2.5.3 Installing a DIMM

CAUTION!
removing DIMMs or other system components. Failure to do so may cause
severe damage to both the motherboard and the components.
Installing a DIMM:
1. Unlock a DIMM socket by pressing the retaining clips outward.
2. Align a DIMM on the socket such that the notches on the DIMM exactly
match the notches in the socket.
3. Firmly insert the DIMM into the socket until the retaining clips snap back
in place.
NOTE:
website at www.asus.com
for the latest DIMM
Qualified Vendors List.
Make sure to use only
tested and qualified
DDR400 DIMMs.
14
184-pin DIMM (DDR)
64MB, 128MB, 256MB, 512MB, 1G
64MB, 128MB, 256MB, 512MB, 1G
64MB, 128MB, 256MB, 512MB, 1G
To enhance system performance, utilize dual-channel feature
Make sure to unplug the power supply before adding or
Visit the ASUS
Unlocked Retaining Clip
Chapter 2: Hardware information
Total Memory
x1
x1
x1
=
Locked Retaining Clip