LENCO Auto Glide Owner's Manual page 32

If the lost Data is reacquired while the Auto Glide is in LIMP HOME MODE, the Key Pad will flash a
REACQUIRED DATA MESSAGE that indicates the Auto Glide has regained all the information it needs to make
automatic boat control decisions. However, the Auto Glide will default back to MANUAL MODE so that you have
to make a conscious decision to go back into an AUTOMATIC SETTING.
The REACQUIRED DATA MESSAGE will flash five times to inform you that the Auto Glide has all of the required
Data needed to perform automatic boat control decisions. However, the Auto Glide defaults back to MANUAL
MODE after flashing the REACQUIRED DATA MESSAGE.
Once the Auto Glide has transitioned back into MANUAL MODE, you can either continue to control the boat's trim
tabs manually or you can press any of the four (4) AUTOMATIC SETTING BUTTONS so the Auto Glide can
return to controlling the boat's ROLL AND PITCH POSITIONS automatically.
32