JL Audio Gotham g213 Owner's Manual page 19

IMPORTANT
| Gotham g213
Unbalanced Inputs
Th e Gotham subwoofer features individual left and right unbalanced RCA-
type input connectors. Th ese are the most commonly used connectors for home
audio applications and must be used if your receiver or preamplifi er/processor
does not provide balanced outputs. While unbalanced connections are not as
noise-immune as a balanced connection, Gotham subwoofers employ optical
isolation on the unbalanced inputs to minimize the possibility of noise in your
system.
For systems with a mono subwoofer or "LFE" channel connection, only
the RCA-type jack labeled "Left or Mono" will be used. Th is applies to most
modern multi-channel receivers and preamplifi er / processors. Separate left and
right RCA-type input jacks are provided for systems without a dedicated mono
subwoofer connection. Th is typically applies to two-channel audio equipment.
Technical Notes:
• When balanced outputs are not available on the signal source, you must
use the RCA-type unbalanced inputs. Gothams feature optical isolation
circuitry on the unbalanced inputs to minimize the likelihood of ground
loop induced noise.
• Connections are industry-standard for unbalanced signal cables as follows:
RCA-type connection:
Tip: Positive
Sleeve: Negative
IMPORTANT: IF NOISE EXISTS AFTER CONNECTION, GOTHAMS ALLOW
FOR GROUNDING OR ISOLATION OF THE UNBALANCED INPUTS. PLEASE
REFER TO THE "INPUT MODE SWITCHES" SECTION ON PAGE 20 OF THIS
MANUAL FOR FURTHER INFORMATION ON MINIMIZING NOISE.
Page 19