Advertisement
ADDITIONAL INFORMATION
FOR DUAL-VOLTAGE APPLIANCE
For use in North America, the voltage selector
switch should be placed in the 125 position.
For use in several countries overseas, the
voltage selector may need to be placed in the
250 position. Confirm the voltage available
at each overseas location before using the
appliance. For connection to a 250 volt
supply, use an attachment plug adapter of
the proper configuration for the power supply
receptacle..
For 110-125 Volt Operation
Flick the dual voltage switch to the 125
position. In this position, the dryer has two set-
tings. It provides two speeds and two heats - low
speed and low heat on LO and high speed and
high heat on HI.
For 220-250 Volt Operation
First put the HI-LO switch into LO. Flick the
dual voltage switch to the 250 position. At
220-250V while set at LO, the dryer operates only
at high speed with high heat. Do not attempt to
operate the HI-LO switch or change to 125
when operating on 220-250V. The switches
must be set and remain in the LO and 250
positions. A plug adapter may be necessary in
certain countries.
WARNING: IF YOU
THINK THE POWER
IS OFF WHEN THE
SWITCH IS OFF,
YOU'RE WRONG.
KEEP AWAY FROM WATER
Everyone knows that electricity and water
are a dangerous combination. But did you
know that an electrical appliance is still
electrically live even if the switch is off? If
the plug is in, the power is on. So when you
are not using your appliances, keep them
unplugged.
ALWAYS UNPLUG
SMALL APPLIANCES
PUBLIC SERVICE AD FROM ASSOCIATION OF HOME APPLIANCE
MANUFACTURERS AND UNDERWRITERS LABORATORIES, INC.
Advertisement
