Advertisement
4. OPERATING CONDITION
(1)Input signal level:
VS 1.0Vp-p 6dB
(2)Power input voltage:
11 to 17V DC
(3)Ambient temperature
(a)Full specifications:
0 to 40
(b)Operating:
-10 to 45
(c) Storage:
-20 to 60
5. EACH DESCRIPTION
R Tally lamp
G Tally lamp
Front tally switch
(FRONT TALLLY OFF/ON)
Aperture control (APT)
Brightness control (BRIGHT)
Contrast control (CONTRAST)
IMPORTANT NOTICE
For U.S.A.
s have been tested and
These product
found to comply with the limits for a
Class A digital device, pursuant to Part
15 of the FCC Rules.
These limits
are designed to provide reasonable
protection against harmful interference
when the equipment is operated in a
commercial
environment.
These
products generates, use, and can
radiate radio frequency energy and, if
not installed and used in accordance
with the instruction manual, they may
cause harmful interference to radio
communications.
Operation of these
product in a residential area is likely to
cause harmful interference in which
case the user will be required to correct
the interference at his own expense.
WARNING
Changes
or
modifications
not
expressly approved by Hitachi Kokusai
Electric responsible for compliance
could void the user's authority to
operate the equipment.
For Canada
These products do not exceed the
class A limits for radio noise emissions
from digital apparatus as set out in the
radio interference regulations.
Le présent appareil n'émet pas de
bruits radioélectriques dépassant les
limités
applicable
aux
appareils
numériques de classe A prescrites
dans le réglement sur le brouillage
radioélectrique édicter par le ministére
des communications du canada.
Advertisement
