Making A Phone Call Through A Conventional System - Motorola HT1550-XLS User Manual

5 Press and Release the PTT button.
• If phone access is successful, a dial tone
• If phone access is unsuccessful, a low-
6 E
nter the phone number with the keypad. The
number is automatically sent without pressing
the PTT button again.
–or–
m
number from the
phone list.
Press and release the PTT button again to
send the number.
7 Hold the radio in a vertical position with the
microphone 1 to 2 inches (2.5 to 5 cm) away
from your mouth. Press the PTT button to talk;
release it to listen.
8 To disconnect the phone call:
Press and hold ( to exit Phone.
D no longer appears on the LCD.
56
English
sounds.
pitched alternating tone sounds. Discon-
nect the call (see step 8) and try again.
to select a
XXX-XXX-XXXX
MAKING A PHONE CALL D
THROUGH A CONVENTIONAL
SYSTEM
To initiate a phone call:
Press the preprogrammed Phone button, and
skip to step 5.
–or–
Press the PTT button, and if the Hot keypad
feature has been programmed by your dealer,
do the following:
1 Select a conventional zone and channel that
have been programmed for telephone.
2 ) to enter menu mode.
m
3
until
) to select
4
D appears on the LCD screen when you are
in Phone Mode.
Phone
Phone