Setting The Power Level - Motorola HT1550-XLS User Manual

m
2
3 ) to select
m
4
5 ) to select
m
6
or until
)
7

SETTING THE POWER LEVEL

Each channel in your radio has a predefined
transmit power level that can be changed.
• High power (
that is farther away.
• Low power (
charge.
• Auto power (conventional operation only)
automatically sets the optimal power level
based on the strength of the signal
38
English
until
Utilities
Utilities
until Squelch
Squelch
until Sqlch Tight
Sqlch Normal
to confirm your selection.
S ) allows you to reach a radio
R
) conserves the battery's
received. If the received signal is weak, the
transmit level will be set to high, and vice-
versa.
Note: Be aware that a message received from
a nearby radio might change your
radio's power level to low. This may
cause radios that are farther away not to
receive your transmissions.
To set the power level:
Press the preprogrammed Power Level button
(see page 11) to toggle between low and high,
–
or–
Do the following:
B
1 ) to enter Menu Mode.
m
2 until
3 ) to select
m
4 until
5 ) to select
The display shows the current power level.
Utilities
Utilities
Power Level
Power Level