Advertisement
C. To recharge the built-in rechargeable battery:
You can charge the Bluetooth Speaker's battery in two ways:
Connect Bluetooth Speaker to the Computer. Or,
Use the USB power charger. (not included)
D. Connection and Charging:
Connect the Bluetooth Speaker's Micro USB connector with the Computer's USB port
through USB cable (supplied).
The charging LED turns ON in red light. (make sure that the computer is turned ON)
The charging LED will switch to green light when it's fully changed.
Disconnect the USB cable when it is done.
Charging LED Function
1.
No DC power input:
2.
In Charging:
3.
Charge Completed:
E. Turn ON/OFF & Play from Bluetooth device:
Slide the power switch to "ON" position to turn on the Bluetooth speaker.
The mode LED indicator (Bluetooth / Aux In) will turn ON and light blue with blink every
half second once, when it is searching Bluetooth devices.
Power & Mode Indicator Function:
Item
Description
1.
Power in OFF
2.
Power in ON
2.a
2.b
2.c
Then, activate the Bluetooth function in your Bluetooth device (such as Mobile Phone
or Personal Computer); the device will enter to Bluetooth searching mode
automatically, if not, tap the relate selection to manually enter to searching mode. (refer
to your device's manual when necessary)
Your Bluetooth device should show "BTS-110" in list, and then select it for pairing.
Waiting for some seconds and you will see connected message as shown on your
Bluetooth device.
For some Bluetooth devices, you may need to input "0000" as pairing password. Once
devices paired, the Bluetooth Speaker will beep twice and the mode LED stays steadily
LED light OFF
Light On in red color
Light color from red switch to green
Light and Mode Function
Light OFF.
Light ON;
At Bluetooth searching mode:
At Bluetooth Paired mode:
At AUX In Mode:
(3.5 mm jack plugged In)
Mode Light Status
Blue light blinking; every half second
once.
Blue light blinking; once per 3 seconds.
Light color switch to red color from blue.
Advertisement
