2. Using your digital camera 2.1 Changing function modes Press the POWER/MENU button, the camera goes into menu interface, you can press the UP button to select and then by pressing the SHUTTER button to enter next menu, the screen will display the following symbols, and the interpretations are as follows: Icon Mode...
Page 5
Icon Mode Non-Compression Compression Mode Rate Compression Mode Icon Mode 50Hz Anti Flicker 60Hz Page 4 of 17...
Page 6
Deleting all Battery Indicator Icon Mean >70% >35% >5% Page 5 of 17...
Page 7
<=5% 2.2 Inserting batteries Open the camera’s battery compartment cover and insert 2 new AAA alkaline batteries according to its polarity shown, then close it and press the Power/Menu button to power on the camera. After powered on, if you want to make changes to the camera’s default settings, please read the instructions of this manual.
Page 8
2.3 Taking photos After powered on, the camera is ready to take photos, just press the Shutter button. A distinct beep can be heard and a photo is taken. The number displayed on the screen is the remaining number of pictures that can be taken.
Page 9
2.5 Timer / AVI / Continuous Capture Mode Press the Power/Menu button once, the first icon<camera> is the default mode. Press shutter button camera mode changes <Take photos-->Timer-->AVI-->Continuous Capture >. Press the Power/Menu again to enter to the mode of your choice. Self-Timer Continuous Capture 2.6 Modifying resolution...
Page 10
Press the POWER/MENU button and UP button, until the icon < Compression > is selected, and then press the shutter button to change. Press the Power/Menu again to enter the mode of your choice. Note: Higher quality pictures can be expected in the non-compression mode. In compression mode, more pictures can be stored.
Page 11
3.1 Installation of the Driver Insert the CD in your CD-ROM drive, Click on <install Driver>. Follow the step-by-step instructions to finish installation. After restarting the computer, <Dual mode camera> will appear on the desktop of your computer. 3.2 Downloading picture Connect the camera to your computer with the USB cable.
Page 12
3.4 Using Ulead Photo Express Photo express is a photo-editing program with a wide variety of editing and sharing options that give you a great amount of freedom when you process the photos. Double-click on the icon to start the program .Click on "Get photo" and select the digital camera.
Page 13
easy-to-use. With built-in help、 explanations of menus and buttons, it is very easy to edit your photos. 3.5 Creating and saving a video Follow the directions for downloading your pictures as described in section 3.2. Once your video clips have been saved in “AVI” mode you can use Windows Media Player to watch the video.
Page 15
Should you require in-guarantee service, send your product and proof of purchase directly to Global Point Products, 5815 County Road 41, Farmington, NY 14425 U.S.A. Enclose a check or money order for $5.00 to cover handling charges and postage.
Page 16
Service If you have a problem, DO NOT RETURN THE CAMERA TO THE RETAILER. Contact our Customer Service Department for immediate assistance at (800) 367-0732, Extension 27, Monday through Friday 10:00 4:00 EST; email customer_service@globalpointusa.com. FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
Page 17
• Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help Page 16 of 17...
Need help?
Do you have a question about the Digital Fun Camera and is the answer not in the manual?
Questions and answers