Wep Setup - Belkin F5D7230-4 User Manual

Using the Web-Based Advanced User Interface

WEP Setup

64-Bit WEP Encryption
1.
Select "WEP" from the "Security" menu's
"Allowed Client Type" .
2.
Select "64 bit" from the drop-down menu in "WEP Mode" .
3.
After selecting your WEP encryption mode, you can enter your
key by typing in the hex key manually, or you can put a check
mark in "Passphrase", then type in your passphrase . Click "Apply
Changes" to generate four different hex keys .
A hex (hexadecimal) key is a combination of numbers and letters
from A–F and 0–9 . For 64-bit WEP, you need to enter 10
hex keys .
For instance: AF 0F 4B C3 D4 = 64-bit WEP key
WARNING:
If you are configuring the Wireless G Router or access point
from a computer with a wireless client, you will need to reconnect to the
Router and set up the connection with the security key you've set up .
56 56