Changing The Modes; Setting The Time; Setting The Calendar - Citizen QUARTZ Eco-Drive CTZ B6818 Instruction Manual

CHANGING THE MODES

Other than the time display, this watch has alarm
and chronograph main display functions.
Displays present time in
hours, minutes, seconds
and 24-hours.
Use the 24-hour hand to
confirm am/pm.

SETTING THE TIME

Check that the mode hand is
indicating <TME> and the
watch is in time mode.
1. Pull the button
Time setting synchronizes the minute hand ➝
1.
hour hand ➝ 24-hour hand. When adjusting the
hour hand, check the 24-hour hand position
(am/pm).
2. Set the time by pressing the button
Each time button
B
advances 1 minute in a clockwise direction.
Each time button
C
back 1 minute in a counterclockwise direction.
Depress button
B
hands move rapidly. turn the hands in the
direction that is closest to the set time.
3. After setting the time, push the button
normal position and the watch will start at the
correct time.

SETTING THE CALENDAR

Press button M to switch to calendar mode <CAL>.
1. Pull button
2. Press button
(Example: 3:00 ➝ March, 1:00 ➝ January)
2.
Correction can be made rapidly by holding button
down.
A
Displays current date by
second hand (month)
and date. Since the
date and function hand
are syncronized with
each other, the function
hand will turn at when
correcting the date.
out, so that
M
the second hand stops at the
"0" position. When the watch
is adjusted by button operation,
the time setting is completed
by electromagnetic correction.
or button
B
is pressed...The watch
is pressed...The watch turns
or button continuously, the
C
M
out.
M
to correct
A
the month number.
Correction can be made by
advancing by one month each
time button is pressed.
A
The month number can be
read directly from the normal
hour positions.
Each press of the M button changes Time <TME>
➝ Calendar <CAL> ➝ Chronograph <CHR>.
Confirm the change with the mode hand.
After that it returns to the time <TME> display.
Display alarm set time.
The alarm setting is in
1 minute. Confirm of
am/pm with the 24-hour
hand. If the alarm is
ON, it will ring at the set
time for 15 seconds
once every day.
3. Press button
Correction can be made by advancing one day
each time button
advances one day when the function hand makes
four turns. Correction can be made rapidly by
holding button
4. Push button
* Since the date and function hand are synchronized
with each other, the function hand will turn at
when correcting the date.
* Date correction at the end of each month is not
required. However, since February is set at 28
days, date correction must be performed only for
February in leap years.
.
C
Leap Year Adjustment
1. Press button
2. Pull out the button M by one click.
3. Press button
set/cancel the leap year.
• The leap year is set if button
pressed when March 1 is displayed.
to the
• The leap year is cancelled if button
continuously pressed when February 29 is
displayed.
4. Push button
* Once the leap year is set, February 29 is
displayed once in every four years.
Measures up to a
maximum 60 minutes
in 1/20 seconds, and
displays split times.
A confirmation rings
when you start/stop or
measure a split time.
to correct the date.
B
is pressed. The date
B
down.
B
in to the normal position.
M
to change the mode to <CAL>.
M
for more than two seconds to
C
is continuously
C
back into normal position.
M
is
C