2. Unlatch three clips and lift up the
underhood electrical center
cover to remove.
The removal of the air filter/cleaner
assembly and base is required for
the replacement of one of these
bulbs:
1. Open the hood. See
.
2. Remove the air cleaner/filter
cover. See
3. Lift the air cleaner/filter base to
disengage from the three pins.
1. From the back side of the
headlamp assembly, remove the
top cap to replace the low-beam
headlamp/DRL bulb.
.
2. From the back side of the
headlamp assembly, remove the
bottom cap to replace the
high-beam headlamp bulb.
3. Disconnect the electrical
connector.
4. Remove the bulb socket from
the headlamp assembly.
5. Replace the bulb in the bulb
socket.
6. Install the bulb socket in the
headlamp assembly.
7. Connect the electrical connector.