Teac LP-P1000 Owner's Manual page 36

Checking the program order
When stopped, press the MEMORY button to cycle
through the program numbers and the programmed
track numbers in order.
Adding tracks to the end of the program
1 When stopped, press the MEMORY but-
ton repeatedly to show the number
which is one higher than the last pro-
gram number.
When using an audio CD, the track number and
MEMORY indicator will blink.
When using a MP3/WMA disc, the folder number,
file number and MEMORY indicator will blink.
2 Press the .m or ,/ button
to select a track.
36
Programmed playback (2)
3
1
2
Press the MEMORY button.
The track/file is added to the end of the program.
Changing a track/file within the program
When programmed playback is stopped,
press the MEMORY button repeatedly
until the program number of the track/
file you want to change appears on the
display.
Use the skip/search (.m/,/)
buttons to select the track that you
want to use as a replacement in the
program.