Using The Keypad - Targus Wireless Keypad and Mouse Combo User Manual

Wireless Keypad
1 Press and release the connect button on the receiver again.
2 Press the connection button located on the back of the
keypad.
When the light emitter diode (LED) on the receiver is lit,
the keypad is set up with an ID and the receiver is
locked. You are now ready to use the keypad.
NOTE: The ID code between the receiver and the keypad
must be synchronize again if the batteries are replaced.
Please refer to "Setting the identification code" for
instructions.

Using the Keypad

Activate Num Lock
Definition of the keys:
Num
/
Lock
7 8
4 5
1 2
0 00
Targus Wireless Keypad and Mouse Combo
Bk Sp
*
9 -
6 +
3
Enter
.
Connect button
Deactivate Num Lock
Definition of the keys:
Num
/
Lock
Home
End
,
In
s
7
Bk Sp
*
PgUp -
+
PgDn
Enter
Del