ION AIR PRO User Manual page 45

2. Click the "Firmware Check" button.
3. Click the "Check" button.
4.
The ion software will automatically determine if there is a new firmware
version available. A notification will be given if a new firmware version has
been detected, display the new version number and indicate the new version
numbers and enhancements for the new version.
5.
Click "Download" button and the new firmware version will be downloaded to
the MicroSD card. A notification will be given indicating that the download has
successfully transferred to the card.
6.
Click the "Install" button to confirm that you want to install the newer firmware
version.
7.
Unplug the USB cable from the PC and the camera will automatically install
the latest firmware version. The Green LED illuminates to show that the
firmware is installing. The process will take approximately 20 seconds.
8.
The Green LED will turn off once the installation of the new firmware is
completed.
9.
The camera will turn off when the upgrade is done. You can power on the
camera and the new firmware will be effective.
www.iontheaction.co.uk
45
EN -