Tall Bottle And Gallon Storage Drawer; Door Bins; Adjustable Shelves; Interior Light - Norcold 121X series Owner's Manual

Rv refrigerators
Hide thumbs Also See for 121X series:
Table of Contents

Advertisement

Available languages

Available languages

- Remove the retainer.
- Remove the glass crisper covers.
- Remove the crisper support wall.

Tall bottle and gallon storage drawer:

The tall bottle and gallon storage drawer [138] is located at the bottom right side of the fresh food
compartment and supplies a storage area for items such as 2-liter bottles or gallon milk containers
(See Art01790). This drawer has a divider which prevents items from moving and/or overturning
while the vehicle is in transit. Make sure that you always push the drawer fully in.
The divider fits down into grooves on the inside of the drawer. The divider also fits at the rear of the
drawer so that you can use all of the capacity of the drawer.
NOTE: Do not wash the drawer or divider in a dishwasher. The drawer and divider are not
dishwasher safe.

Door bins:

You may put the door bins [52] of the freezer and fresh food compartment in a location that best
meets your needs (See Art01114). To remove the bins, lift them over the locator and pull them
forward. To install the bins, push them onto the locator.
NOTE: Do not wash the door bins in a dishwasher. The door bins are not dishwasher safe.

Adjustable shelves:

The shelves in the freezer and the fresh food compartment are made so you can remove them or
move them.
To remove or move the shelf of the freezer:
- Pull the shelf forward out of the slot.
- Push it fully into the slot that you wish.
To remove or move the shelves of the fresh food compartment:
- Remove the screws [41] from each retainer [54] on the side of the refrigerator (See Art00992).
- Remove both retainers.
- Pull each shelf forward out of the slot.
- Push each fully into the slot that you wish.
- Install both retainers with the screws.

Interior light:

The interior light is at the top of the fresh food compartment. It comes on when the
refrigerator is ON and the door is open. To replace the bulb:
1. Remove the DC power supply wires from the power board at the rear of the refrigerator.
2. Remove the cover [57] by pulling it toward the front of the refrigerator (See Art00988).
3. Remove the light bulb [58] from the holder [59].
41
52
Art01798
59
58
Art00988
Owner's Manual 5
54
Art00992
57

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents