Displaying The Setup Screen; Selecting From The Setup Screen - Universal Remote Medius TX-1000 Manual

M O M
EDIUS WNERS ANUAL

Displaying the Setup Screen

You can adjust the settings of the Medius whenever you like by pressing and
holding both the WATCH and the SEL button at the same time for three sec-
onds. When you do, the screen will change to the SETUP screen. If you do
not press any button on the SETUP screen within 30 seconds, the Medius
will time out and automatically return to normal operation. You can return to
normal operation before that by pressing either the WATCH or the LISTEN
button.
At the same time, press and
hold both the WATCH
button and the SEL button.
When the SETUP screen
appears, you can release the
two buttons.

Selecting from the Setup Screen

Simply touch the button for the setting you'd like to adjust:
TIME - The time displayed on the Medius.
LCD - The appearance of the screen.
LIGHT - What the LIGHT button does.
SOUND - The beeps the Medius can make.
SYSTEM - The battery low warning.
TOUCH - Calibration of the touch screen.
VER - No adjustments are possible. Displays factory info.
Page 7