Call Settings - Nokia 6510 User Manual

M e n u f u n c t i o n s
Date
Press Menu, select Calendar,
Options and Settings.
Select Set the date,
and Date separator
and the way you want it to be
displayed.
Auto update of date and time
Press Menu, select Settings,
settings and Auto update of date
and time (network service). To set
the phone to automatically update
the time and date according to the
current time zone, select On. To set
the phone to ask for a confirmation
before the update, select
first.
Updating the date and time affects
the alarm clock, calendar and voice
recorder, and the alarm notes you
have set are now set to the local
time. Updating may cause some
calendar notes to expire.

Call settings

Call divert
Press Menu, select Settings,
settings and Call divert
service). With call divert you can
direct your incoming calls to another
number, for example, to your voice
mailbox number. For details, contact
your service provider. Divert options
not supported by your SIM card or
your network operator may not be
shown.
30
Date format
to set the date
Time
Confirm
Call
(network
Copyright © 2004 Nokia. All rights reserved.
Select the divert option you want,
for example, select
divert the voice calls when your
number is busy or when you reject
an incoming call.
To set the divert setting on, select
Activate, to set the divert setting
off, select Cancel, or
check whether the divert is activated
or not. To change the timeout when
the call is diverted, first select
delay if this is available for the divert
option, and then select
set the divert setting on.
To cancel all the active call diverts at
once, select the option
diverts.
To see the divert indicators in
standby mode, see
on page 2.
Anykey answer
Press Menu, select Settings,
settings and then
Select On and you can answer an
incoming call by briefly pressing any
key, except
Automatic redial
Press Menu, select Settings,
settings and Automatic
Select On and your phone will make
a maximum of ten attempts to
connect the call after an
unsuccessful call attempt.
Divert if busy to
Check status to
Set
Activate to
Cancel all
"Standby mode"
Call
Anykey answer.
and .
Call
redial.