Writing Text; Using Traditional Text Input - Nokia 6510 User Manual

4. Writing text

You can key in text in two different
ways, using the traditional method,
or another method called predictive
text input.
■ Using traditional text
input
The indicator is shown on the top
left of the display when you are
writing text using the traditional
text input.
• Press a number key,
, repeatedly until the
desired character appears. All the
characters available under a
number key are not printed on
the key. The available characters
depend on the language selected
in the Language
"Language" on page 31.
To insert a number, press and
hold the number key you want.
• To switch between letter and
number modes, press and hold
. Number mode is indicated
by 123 at the top of the display.
• If the next letter you want is
located on the same key as the
present one, wait until the cursor
appears, or press
and then key in the letter.
to
menu. See
or ,
Copyright © 2004 Nokia. All rights reserved.
• If you make a mistake, press
Clear to remove the character to
the left of the cursor. Press and
hold Clear to delete the
characters more quickly.
• The most common punctuation
marks and special characters are
available under the number key
.
Pressing
special characters. Scroll through
the list and press
character.
To scroll through the list more
quickly, press
and , then press
select a character.
• To insert a space, press
• To switch between upper case
and lower case, press
symbol ABC or abc shown at the
top of the display indicates the
selected case.
• Press or
cursor to the right or left,
respectively.
W r i t i n g t e x t
brings up a list of
Use to select a
, ,
to
.
. The
to move the
11