Brake And Clutch Fluid Check; Washer Fluid Check; Technical Specifications - Ford FOCUS Owner's Manual

BRAKE AND CLUTCH FLUID
CHECK
WARNINGS
Use of any fluid other than the
recommended brake fluid may
reduce brake efficiency and not meet
Ford's performance standards.
Do not allow the fluid to touch your
skin or eyes. If this happens, rinse the
affected areas immediately with
plenty of water and contact your doctor.
If the level is at the MIN mark, have
the system checked by a properly
trained technician as soon as
possible.
Note: Keep brake fluid clean and dry.
Contamination with dirt, water, petroleum
products or other materials may result in
brake system damage and possible failure.

TECHNICAL SPECIFICATIONS

Vehicle fluids
Note: Use fluids which meet the specifications or requirements defined. Use of other fluids
may lead to damage which is not covered by your Warranty.
Item
Engine oil - gasoline
engines only
Alternative engine oil
- all gasoline engines
except 1.0L EcoBoost
Engine oil - diesel
engines
Focus (CB8) Vehicles Built From: 26-08-2013, Vehicles Built Up To: 31-12-2013
Maintenance
Specification
WSS-M2C948-B
WSS-M2C913-C
WSS-M2C913-C
215
Note: The brake and the clutch systems are
supplied from the same reservoir.
Top up with fluid that meets the Ford
specification. See Technical
Specifications (page 215).

WASHER FLUID CHECK

Note: The front and rear washer systems
are supplied from the same reservoir.
When topping up, use a mixture of washer
fluid and water to help prevent freezing in
cold weather and improve the cleaning
capability. We recommend that you use
only high quality washer fluid.
For information on fluid dilution, refer to
the product instructions.
Viscosity
Recommended fluid
Grade
5W-20 Castrol or Ford Engine Oil
5W-30 Castrol or Ford Engine Oil
5W-30 Castrol or Ford Engine Oil