Table of Contents
Advertisement
XIV. Advanced Settings
Auto Flash Detect
The light includes a flash sensor that will turn off the light for 2 seconds
if it detects an external flash firing.
backscatter. You may disable the auto flash detect as follows:
1) With light in the OFF state, push and hold the power button for 3 seconds.
2) Release the power button when the indicator lights begin blinking and light
turns off.
3) Two quick blinks per second indicates Flash Detect is enabled. One blink
per second means the Flash Detect is disabled.
4) Push and release power button to switch modes.
5) Push and hold the power button to save and exit the Flash Detect setting.
Performance and Economy modes
The light is set to "Performance" mode, which means it maintains
constant brightness (lumens) even as the battery charge is depleted. The
light can also be set to "Economy" mode, so the brightness gradually
reduces as the battery charge drops, which doubles the battery life (burn
time). To select between these two modes:
1) With light in the OFF state, push and hold the power button for 7 seconds.
2) Release the power button when the middle indicator light begins blinking.
3) Two quick blinks per second means the light is set to Performance mode.
One blink per second means the light is set to Economy mode.
4) Push and release power button to switch between the two modes.
5) Push and hold the power button to save and exit the mode setting.
20
This feature helps reduce
Hide quick links:
Advertisement
Table of Contents
