Coleman ROCK SPRINGS 9277-174 Instructions

When You Are Ready To Set
Up Your Tent
–Select a level campsite clear of
rocks, branches and other hard or
sharp objects.
–Do not set up your tent under trees.
–For best results in windy conditions,
position the end of tent into the wind.
–Set up works best with two people.
Layout & Positioning
1
of Tent, Pole Assembly
–Layout and position tent with screen and
doors facing desired directions. (illus. 1)
–Unzip doors.
–Stake down tent, through the intermediate
fabric loops and corner rings on the
stake loops. Keep the floor taut. (illus. 2)
–Stake down screen room through elastic
fabric loops.
–Assemble all frame poles by interlocking
shock-corded poles.
–Insert the black main tent poles (3) through
the three pole sleeves that form a triangle
on the top of the tent. They will cross. (illus. 1)
–Insert grey side poles (3) through
the pole sleeves above each door.
Assembled black main tent poles
inserted through pole sleeves
Door
illus. 1
Grey side pole
Front
through front
Screen Room
pole sleeves
ROCK SPRINGS
Instructions apply to Part Number 9277-174
Main Tent
Pole (Black)
Side Pole
Grey side pole
through pole
sleeves
illus. 2
Tent stake
through ring
on stake loop
WITH SCREEN ROOM
™
17'x14'
Part No. 9277-310
Part No. 9277-320
(Grey)
Rainfly Part No. 9277-325
2 Connect Frame to Tent
–At the back tent corner, insert the pin into the
end of black main tent pole. (illus. 3, illus. 4)
–Go to opposite end of pole and gradually
apply pressure to the pole forming an arch
until you are able to insert the pin closest to
the screen room into the pole end. Repeat
for second black pole.
–Insert pin on the side of tent into the end of the
third black main pole running above the front
door. Go to opposite end of pole and gently
apply pressure to the pole forming an arch until
you can insert the side pin into the pole end.
(illus. 3), (illus. 4)
–Insert other side pin into grey side pole end
and gently apply pressure to the pole, forming
an arch until you can insert the pin at the rear
of tent into the pole end. Repeat for second grey
pole. (illus. 4), (illus. 5)
–Insert other front pin into grey side pole end that
is over the screen room and gently apply
pressure forming an arch until you can insert the
pin on the other side of the screen room into the
grey pole end. (illus. 4), (illus. 5)
Door
Grey Side
poles
over each
door
illus.3
Insert pin into pole end
Main poles
illus. 4
Tent frame
set-up