Great Dane C5 Chariot GCBR2661S Operator's Manual page 52

GETTING QUALITY SERVICE
Inflation Rear (Maximum) . . . . . . . . . . . . . . . . . . . . .69-97 kPa (10-14 psi)
Wheel Nut Torque . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100 N•m (75 lb-ft)
Capacities
Fuel Tank . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30.2 L (8 gal)
Hydraulic System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.54 L (3.75 qt)
Net Weight - Chariot (With Mower Deck and Without
Fuel
Chariot With 48-in. Deck . . . . . . . . . . . . . . . . . . . . . . . . . 499 kg (1100 lb)
Chariot With 52-in. Deck . . . . . . . . . . . . . . . . . . . . . . . . . 510 kg (1124 lb)
Chariot With 61-in. Deck . . . . . . . . . . . . . . . . . . . . . . . . . 521 kg (1149 lb)
Travel Speeds
Forward . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0-18 km/h (0-9 mph)
Reverse . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0-8 km/h (0-5 mph)
Dimensions
Wheel Base . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.10 m (43.375 in.)
Track Width . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.21 m (47.5 in.)
Overall Height . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.09 m (42.75 in.)
Overall Length . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.97 m (77.75 in.)
Overall Width (with 48-in. Deck) . . . . . . . . . . . . . . . . . . . . . 1.50 m (59 in.)
Overall Width (with 52-in. Deck) . . . . . . . . . . . . . . . . . . . . . 1.70 m (67 in.)
Overall Width (with 61-in. Deck) . . . . . . . . . . . . . . . . . . . 1.90 m (74.5 in.)
Getting Quality Service
Service Literature
If you would like to order a copy of the Parts Catalog or Operator Manual
for this machine, contact your dealer. Parts catalogs and operator manuals
are also available online at GreatDaneMowers.com.
Parts
We recommend Great Dane quality parts available at your Great Dane
dealer.
Part numbers may change, use part numbers listed below when you order.
If a number changes, your dealer will have the latest number.
When you order parts, your Great Dane dealer needs your machine serial
number and engine serial number. These are the numbers that you
recorded in the Product Identification section of this manual.
Great Dane Quality Continues with Quality Service
Great Dane provides a process to handle your questions or problems,
should they arise, to ensure that product quality continues with your
authorized Great Dane dealer's parts and service support.
Follow the steps below to get answers to any questions you may have
about your product.
1.Refer to your attachment and machine operator manuals.
2.Contact your authorized Great Dane dealer with unanswered questions.
Getting Quality Service - 50