Dell OPTIPLEX 990 Technical Manualbook page 15

DELL™ OPTIPLEX™ 990 TECHNICAL GUIDEBOOK —VERSION 1.5
DRIV ES AND R EM OVABL E ST ORAG E
RAID 0 Performance: (includes two matching capacity/speed hard drives)
1
1TB SATA 7200 RPM HDD (3.5")
1
500GB SATA 7200 RPM HDD (3.5")
1
320GB SATA 7200 RPM HDD (3.5")
1
250GB SATA 7200 RPM HDD (3.5")
1
500GB SATA 7200 RPM Hybrid HDD (2.5")
1
500GB SATA 7200 RPM HDD (2.5")
1
250GB SATA 7200 RPM HDD (2.5")
Optical Drive: (SFF/USFF require slim-line optical drive)
Blu-ray Writer SATA 1.5Gbit/s
2
DVD+/-RW SATA 1.5Gbit/s
3
DVD-ROM SATA 1.5Gbit/s
Media Card Reader: (requires slim line optical)
Dell 19 in 1 Media Card Reader
NOTE: Dell 19 in 1 Media Card Reader (MCR) is supported via a F5 to F3 bay converter on the MT and DT and may require a slim
line optical drive depending on selectable configuration. MCR is not available on the SFF and USFF.
S YSTEM EXPANSI ON S LOTS
NOTE: See Detailed Engineering Specifications for supported voltage, maximum wattage and card dimensions.
NOTE: Add in card location and priority: PCI: 1394; PCIe x16: GFX, USB 3.0, Serial, Parallel/Serial, NIC, Wireless; PCIe x4: GFX,
USB 3.0, Serial, Parallel/Serial, NIC, Wireless; PCIe x1: USB 3.0, Serial, Parallel/Serial, NIC, Wireless
PCI Slot
PCIe x16 Slot
PCIe x16 (wired x4) Slot
PCIe x1 Slot
Half mini-PCIe connector
Serial ATA (SATA) connectors
1
For hard drives, GB means 1 billion bytes; actual capacity varies with preloaded material and operating environment and will be less.
2
Discs burned with this drive may not be compatible with some existing drives and players; using DVD+R media provides maximum compatibility.
3
DVD-ROM drives may have write-capable hardware that has been disabled via firmware modifications.
MT DT
X
X
X
X
X X
X X
X X
X X
X X
X X
X X
MT DT
1 1
1 1
1 1
1 1
0 0
4 3
SFF USFF
X
X
X
X X
X X
X X
SFF USFF
0 0
1 0
1 0
0 0
0 1
3 2
15