Back-Panel Features And Indicators; Figure 3. Back Panel - Dell DCS-1130 Setup And Features Information

Back-Panel Features and Indicators

Figure 3. Back Panel

1 2 3 4
ID
1 2
Item Indicator, Button, or
Connector
1 USB connectors (2)
2 RJ-45 (4)
3 System identification
indicator
4 Ethernet connectors (2)
5 KVM over IP Port
6 Serial connector
7 Video connector
8 Single channel optic interface
9 Power-on indicator/
power button
10 Power supply 2 (PS2)
11 Power supply 1 (PS1)
Dell DCS-1130 Setup and Features Information
5 6 7
Icon
8 9
Description
Connect USB devices to the system. The ports are
USB 2.0-compliant.
Embedded 10/100/1000 NIC connectors.
Lights amber when the system needs attention due
to a problem.
Embedded 10/100/1000 NIC connectors.
Dedicated management port.
Connects a serial device to the system.
Connects a VGA display to the system.
In PCIe slot.
The power-on indicator lights when the system
power is on.
The power button controls the DC power supply
output to the system.
NOTE: When powering on the system, the video
monitor can take from several seconds to over
2 minutes to display an image, depending on the
amount of memory installed in the system.
NOTE: On ACPI-compliant operating systems,
turning off the system using the power button
causes the system to perform a graceful shut-
down before power to the system is turned off.
NOTE: To force an ungraceful shutdown, press
and hold the power button for five seconds.
470W
470W
Back-Panel Features and Indicators
10 11
| Page 7