Bosch LTC 8555/00 Instruction Manual page 19

Allegiant Keyboards
Keyboard Interface Connection Type
Direct to Console port (except LTC 8900)
Command: SET-PORT-RS232 0 4 8 0 1 0;_SET_KBD_MODE 0 1
Direct to Printer port (except LTC 8900)
Command: SET-PORT-RS232 4 4 8 0 1 0;_SET_KBD_MODE 4 1
Modem connected to Console port (except LTC 8900)
Command: SET-PORT-RS232 0 4 8 0 1 1;_SET_KBD_MODE 0 1
Modem connected to Printer port (except LTC 8900)
Command: SET-PORT-RS232 4 4 8 0 1 1;_SET_KBD_MODE 4 1
Direct to Controller port (LTC 8900 only)
Command: SET-PORT-RS232 0 4 8 0 1 0;_SET_KBD_MODE 0 1
Direct to Console port (LTC 8900 only)
Command: SET-PORT-RS232 4 4 8 0 1 0;_SET_KBD_MODE 4 1
Modem connected to Controller port (LTC 8900 only)
Command: SET-PORT-RS232 0 4 8 0 1 1;_SET_KBD_MODE 0 1
Modem connected to Console port (LTC 8900 only)
Command: SET-PORT-RS232 4 4 8 0 1 1;_SET_KBD_MODE 4 1
After entering the command, the port will immediately begin to operate in the keyboard mode.
The port will generate a series of constantly repeating codes. The setting remains in effect
until the system is reset, powered off/on, or manually cancelled by entering Ctrl-C several
times, using Windows HyperTerminal program operating at 9600 baud.
If using the LTC 8059 Master Control Software, while online, select the Command Script tab
and enter the script for your connection type exactly as it appears in the table below:
Keyboard interface connection type Command Script
Direct to Console port
(except LTC 8900)
Direct to Printer port
(except LTC 8900)
Modem connected to Console port
(except LTC 8900)
Modem connected to Printer port
(except LTC 8900)
Direct to Controller port
(LTC 8900 only)
Direct to Console port
(LTC 8900 only)
Bosch Security Systems, Inc.
Begin @boot
SET-PORT-RS232 0 4 8 0 1 0
_SET_KBD_MODE 0 1
break
Begin @boot
SET-PORT-RS232 4 4 8 0 1 0
_SET_KBD_MODE 4 1
break
Begin @boot
SET-PORT-RS232 0 4 8 0 1 1
_SET_KBD_MODE 0 1
break
Begin @boot
SET-PORT-RS232 4 4 8 0 1 1
_SET_KBD_MODE 4 1
break
Begin @boot
SET-PORT-RS232 0 4 8 0 1 0
_SET_KBD_MODE 0 1
break
Begin @boot
SET-PORT-RS232 4 4 8 0 1 0
_SET_KBD_MODE 4 1
break
Instruction Manual
Installation | en 15
F.01U.127.290 | 2.0 | 2009.03